Router bit Brain Cramp

[Humberman]

Hello All:

I need to rout a bullnose on the front edge of some shelves that are 4/4. Is there such a thing as a 1" bullnose router bit? I'm not real good with radii, so maybe I'm looking for the wrong thing...don't have a clue !!! Can anybody help?

[Blaine in Kitchener]

Humberman

Is this what you're looking for? http://www.leevalley.com/wood/page.a...58&cat=1,46168

Blaine

[sparky from winnipeg]

Freud makes a 1" bullnose bit, the part number is #18-126

[Humberman]

Gentlemen:

Thank you. I checked both the Lee Valley and Freud catalogs and didn't see either of those. Duh!!

[Don Kondra]

Or use a 1/2" roundover bit with a fence on the router table.

Cheers, Don

[Mike]

Use a ½" quarter round router bit on each side and this will give you a bull nose. This is how I do-it and believe me, I do alot of bull nose moldings