FREE SAMPLE ISSUE
DIGITAL ISSUE PREVIEW
Originally Posted by danquirk
Attachment 41432I received a drill bit kit - many assorted sizes and types with a few extras like a hole saw and some grinding wheels but basically a drill bit kit. In it are 2 - exactly the same - grey things that look like Marr connectors but aren't. They are about that size but (a) have a hole at each end - roughly 7/16" and 3/8" and (b) have a springy thing inside with 6 "teeth". Thought they might be drill bit stops but no, and they are not adjustable
I cannot rip 1/4" or 3/8" stock with a carbide blade on my radial arm saw. It shatters the wood. It's ok for maybe 1/2" certainly 3/4" stock. I can successfully rip thin stock with the older style steel blade. Is this a common problem with radial arm saws? Does anyone else experience the same problem?
Updated 04-20-2011 at 09:36 AM by Bill MacDonald