Re: Golden Oldies (and some not so golden) on Kijiji #2

[beakie]

Oliver double sided 30" disc sander in WIndsor for $250. Been up for a few days
https://www.kijiji.ca/v-power-tool/w...ationFlag=true

last few posts above your are re: Oliver 30" double sided sander, in Windsor... what are the odds?!?!

kidding
hopefully Rob is able to give it a new home.

[northerniron]

yeah saw that after I posted, worst is I actually flipped thru them but obviously didn't have my eyes connected to my brain.

[sophien]

Metal Lathe Derby, Vmt, $350

Not sure this a golden oldie, or what make it is, but it sure looks heavy!

https://vermont.craigslist.org/tls/6343516297.html

[iamtooler]

last few posts above your are re: Oliver 30" double sided sander, in Windsor... what are the odds?!?!

kidding
hopefully Rob is able to give it a new home.

Sander arrived safely this morning by the grace of god. According to the tracking it changed trucks five times going through various depots before being delivered to me. Nobody along the way seemed to notice it was not attached to the pallet in any way. It had wandered over so that the base was about one inch overhanging the pallet on one side. The pallet is considerably smaller than the upper part of the sander, they did not lower the tables before shrink wrapping so it was very vulnerable. I was scared backing it out of the truck because my forks were so close together to get into the little pallet. The truck driver actually kept hi hand on it till I could lower it down. I am a pro truck driver and I would never of accepted the skid, it is incredible that five truckers and four depots handled this skid. It is a beautiful machine!
Rob

[beakie]

Sander arrived safely this morning by the grace of god. According to the tracking it changed trucks five times going through various depots before being delivered to me. Nobody along the way seemed to notice it was not attached to the pallet in any way. It had wandered over so that the base was about one inch overhanging the pallet on one side. The pallet is considerably smaller than the upper part of the sander, they did not lower the tables before shrink wrapping so it was very vulnerable. I was scared backing it out of the truck because my forks were so close together to get into the little pallet. The truck driver actually kept hi hand on it till I could lower it down. I am a pro truck driver and I would never of accepted the skid, it is incredible that five truckers and four depots handled this skid. It is a beautiful machine!
Rob

some things are meant to be

let's see some cleaned up pics in a thread sometime.

[Greg from K/W]

That isnt the shipping companies fault its the seller. They should have known better than to send it like that in the first place. Then the driver that picked it up should have refused it to begin with.

[nnieman]

Sander arrived safely this morning by the grace of god. According to the tracking it changed trucks five times going through various depots before being delivered to me. Nobody along the way seemed to notice it was not attached to the pallet in any way. It had wandered over so that the base was about one inch overhanging the pallet on one side. The pallet is considerably smaller than the upper part of the sander, they did not lower the tables before shrink wrapping so it was very vulnerable. I was scared backing it out of the truck because my forks were so close together to get into the little pallet. The truck driver actually kept hi hand on it till I could lower it down. I am a pro truck driver and I would never of accepted the skid, it is incredible that five truckers and four depots handled this skid. It is a beautiful machine!
Rob

Glad it made its way there !

Nathan

[iamtooler]

Rare Porter Cable Craftmaster table saw?
https://www.kijiji.ca/v-view-details...m_medium=email

75$

[stevem]

Rare Porter Cable Craftmaster table saw?
https://www.kijiji.ca/v-view-details...m_medium=email

75$

that saw was made by henry power tools of london ontario. porter cable resold them under their lable. there are portercable/henry power tools jointers, lathes and drill presses as well and maybe others

henry power tools was also known as craftmaster and was available from several US retailers including montgomery wards(right next to the beavers!)

[sophien]

POITRAS Jointer and Bauerle Shaper
Vaudreuil, QC, $1500

https://www.kijiji.ca/v-business-ind...ationFlag=true

[Greg from K/W]

14 inch Industrial Table saw $2,000.00

https://www.kijiji.ca/v-power-tool/k...ationFlag=true

[Greg from K/W]

https://www.kijiji.ca/v-power-tool/k...ationFlag=true

Old beaver ts.

[Jacques Leclerc]

I think it is the model 3200....but the fence is wrong for this saw, might be for the 2200 model if so would'nt mind to have that fence at all.....

[sophien]

““

“C””” Band Saw 30””” - $600
Saint-Joseph-du-lac, QC

https://www.kijiji.ca/v-outils-elect...ationFlag=true


Nous sommes en train de faire un méga ménage dans la cave. J'ai décidé de me départir de ma grosse scie à ruban acheté il y a 35 ans. Ce modèle a été fabriqué à Montréal par la compagnie Simonds Canada Saw. C'est de facture industrielle et datant du début vingtième siécle. Le gros "housing" est tout en fonte et représente un poid considérable. À l'époque, cette scie devait être installé dans une usine et activée par un gros moteur central qui faisait tourner plein d'autres outils simultanément au moyen de multiples courroies de transmission. Elle fut donc modifié afin d'installé 2 moteurs de 1 HP chacun branchés sur le 220 volts. Une fois que le contact est mis, les moteurs sont démarrés lentement au moyen d'une "clutch" manuelle qui fait raidir les courroies.On peut refendre un madrier de 12". La scie peux prendre des lames de 1 pouce et demi de large. J'ai 2 de ces lames plus une dizaine d'autres lames de largeur différentes.

[sophien]

This one is for Steve Morris: Look! It’s a Henry Ford !

Henry Powertools Bandsaw 12” $300 - Montreal

https://www.kijiji.ca/v-outils-elect...ationFlag=true