Re: Golden Oldies (and some not so golden) on Kijiji #2

[drzaius]

That one is 575V, so it's not just a simple matter of putting a VFD on it. I certainly wouldn't pay $400 for it, given it's condition and the motor specs.

[Beaverfever1988]

Beaver 4200 in toronto area. Looks nice but sounds expensive. No price.


BEAVER 4200 10" FLOOR MODEL CIRCULAR SAW,
https://www.kijiji.ca/v-power-tool/c...nt=app_android

[Doug G]

Anyone need a Watkins Burgsreen jointer for free? https://vancouver.craigslist.org/van...008767521.html

[iamtooler]

It has been deleted already.

[Doug G]

I didn't think it would last long, it was 2 hours old when I saw it. Somebody got a deal.

[Coop42]

Beaver 4200 in toronto area. Looks nice but sounds expensive. No price.


BEAVER 4200 10" FLOOR MODEL CIRCULAR SAW,
https://www.kijiji.ca/v-power-tool/c...nt=app_android

Now says $800 or b/o.

[Scott Walsh]

12" Three-Toed Jointer in Barrie for $500

Has a single phase, 3hp motor, looks good to go.

https://www.kijiji.ca/v-tool-other/b...0740?undefined

[Doug G]

Pair of vintage #15 drill presses in Vancouver area $1200 or $100?

https://vancouver.craigslist.org/van/tls/d/vancouver-vintage-cast-iron-drill-press/7012588462.html


https://vancouver.craigslist.org/pml...016805699.html

[sophien]

https://www.govdeals.com/index.cfm?f...=&category=160

[J Vann]

https://www.govdeals.com/index.cfm?f...=&category=160

Photos for future reference.

Cheers, Vann.

[John Bartley]

In Matheson or Iroquois Falls (not sure which), a Beaver 3400 lathe for $300 asking price.

[Scott Walsh]

Wadkin JY Bobbin/Spindle Sander - $500

https://www.kijiji.ca/v-outils-elect...ale/1477139843

Near Montreal. Seems like the motor has been replaced with a single phase, 120v motor. Looks kinda jerry-rigged but maybe the seller still has the original.

EDIT: I think the motors were integrated into the body, so the original should be there, no?

[streetcore]

Free Beaver 3200 table saw in Toronto. I think I see the fence under the saw and it looks like it also has the rare blade guard and even a dado throat plate. I'd love to have the throat plate for my 3200 if anyone here picks this up and is willing to part with it ;-)

https://www.kijiji.ca/v-free-stuff/c...9076?undefined

[gojaysgo2013]

12 inch jointer

Hamilton On
https://www.kijiji.ca/v-power-tool/h...ter/1473732635


$1,100

[gojaysgo2013]

Wadkin PK Moak Porter etc
https://www.kijiji.ca/v-outils-elect...ier/1467340453
Sherbrooke

.










-


Wadkin PK: with sliding table, everything is there (miter gauge, quadrant etc.) Original painting, new bearings. Purchased from the maintenance workshop of a convent in Sherbrooke, where it had been since delivery (1954). I have the original manual and the original electrical diagram. 4hp 600v comes with two 18 '' blades. 4000 $

-Shaper CO Porter '' The Porter '' 203. + - 1945. with Holz-Her trainer. Precision bearings. New contactor. Weighs approximately 1600 lbs. Super shaper made in Grand Rapids Michigan. Renowned comparable to Northfield, Oliver etc. 1 1/8 '' shaft with 1 1/4 '' adapters. 5 hp 220v $ 1,300

- MOAK 36 Band Saw. 36 '' band saw manufactured in Port Huron Michigan. Similar to Oliver, Tannewitz etc. Weighs 2200 lbs. 7.5 hp 220v motor $ 1,500

-WYSONG & MILES 284 automatic mortiser. Ultra-robust mortiser, automatic with '' clutch ''. Was the top mortiser in furniture factories in the USA. Made in Greensboro NC in the 40s and 50s. Head 5hp and feed 1.5 hp 220 v. New contactors. 1/2 '' and 3/4 '' knives included. Weighs 1800 lbs. $ 1,300

- Steton glider 25 '' (Italian). Need an on-off for the contactor (works by pressing the contactor). Circuit course in the fillage of the mounted electric descent (easy repair, arrived 2-3 weeks ago, works manually while waiting) 600v 7.5 hp. $ 1200