Golden Oldies (and some not so golden) on Kijiji #2

[burlingj77]

Anyone near St. Catherines want a Beaver Lathe?

https://www.kijiji.ca/v-power-tool/s...rce=ios_social

[QC Inspector]

Came up again so I got a screen shot.

Pete

[QC Inspector]

Is that a misprint?

Cheers, Vann.

Nope. Not a misprint. The link is to the type I am talking about, a very good saw. Besides Ryobi are yellow, not red

Pete

[J Vann]

There is a RyoBI scroll saw for sale...

Is that a misprint?

Cheers, Vann.

[QC Inspector]

There is a RBI scroll saw for sale on Facebook Marketplace in St Catharines Ont, or at least there was this morning, for $150.00 (down from $400). I would put up a link but while it showed this morning I can't find it now because it is outside the 500K radius of S'toon. It looks to be in good shape and if someone is interested they should be able to find it. They are $1,300US to $1,500US new plus shipping.
http://www.rbiwoodtools.com/WebsiteP...croll-Saw.html

Pete

[mbchrapko]

Delta Homecraft 11" drill press with hinged mounting base for Deltashop or Homecraft 34-500 tablesaw. Kijiji Edmonton

[stevem]

Beaver Wood Lathe + 4 Cast Iron Beaver Original Legs on Kijiji https://www.kijiji.ca/v-power-tool/o...rce=ios_social


Sent from my iPhone using Tapatalk

i may be wrong, but i'm pretty sure that that is a morse taper headstock. if you look very carefully at the outboard end of the headstock spindle, you can barely see a hexhead bolt. that would be the drawbolt for the mt2/mt1/threaded adaptor. this allows the use of mt2 fittings in the headstock like pen and ring mandrels. unfortunately it also appears to have the old dead center tailstock although there is a way around that too

[stevem]

I can't believe that no one has snapped this up.

Used band saw with spare blade
$75

Listed 5 weeks ago in Tillsonburg, ON


Regards,
Dan G.

https://www.facebook.com/marketplace...d-584552c22d77

no kidding, that's a nice looking beaver 2300. i was looking for one!

[Bob Loblaah]

I can't believe that no one has snapped this up.

Used band saw with spare blade
$75

Listed 5 weeks ago in Tillsonburg, ON


Regards,
Dan G.

https://www.facebook.com/marketplace...d-584552c22d77

[the_goodfellow]

Beaver Wood Lathe + 4 Cast Iron Beaver Original Legs on Kijiji https://www.kijiji.ca/v-power-tool/o...rce=ios_social


Sent from my iPhone using Tapatalk

[Bob Loblaah]

Thanks Nathan.
Regards,
Dan G.

[nnieman]

General Drill Press Model 340 Foot Feed / Cast Iron Belt Guard?

Location: South Frontenac

Old general drill press Needs a new belt $150 obo

Could someone comment on the age of this drill press and the cast iron belt Guard?

https://www.facebook.com/marketplace...4-0cea666633b5



Thanks,
Dan G.

Early 60s
Thats judging by the colour scheme grey with the red badge.
I have a newer version and it’s a great press.

Nathan

[Bob Loblaah]

General Drill Press Model 340 Foot Feed / Cast Iron Belt Guard?

Location: South Frontenac

Old general drill press Needs a new belt $150 obo

Could someone comment on the age of this drill press and the cast iron belt Guard?

https://www.facebook.com/marketplace...4-0cea666633b5



Thanks,
Dan G.

[Paul Smith]

17" Planer by Bournival, $500 in Petawawa area

https://www.facebook.com/marketplace...2111112l%22%7D

[tool fan]

I got his big brother today. It came from a workshop that builds tall ships. You should see the bandsaws that they have! I was alerted to it's availability by a guy that recently purchased a bandsaw from me. At first I thought that it was the smaller Driver Line machine and it wasn't until I got it home the I realized that it was the larger model.

The belt cover has a couple of cracks and has already been welded. The condom sits nicely on top and stays even when the quill is completely up. There will be some challenges to secure the belt cover but other than that it is in very nice shape.

Replaced the motor with a 1.5 hp 3 phase Leeson, replaced the switch, connected a VFD and cleaned off most of the grime. I used the slow speed pulley support to support the belt cover. I was only able to get 2 speed ranges. If I ever find a 5” 4 step pulley with a 3/4” bore ill change it






Sent from my iPhone using Tapatalk