Announcement

Collapse
No announcement yet.

Electric motors

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • al.m..
    started a topic Electric motors

    Electric motors

    i have two electric motors for sale,first is a vintAge ge,1 hp I believe,big and heavy,works,$75
    secont is a newer 5hp,supposedly has never been run,buyer is welcome to try it.it is not tefc.
    $200
    i will get more info and pictures soon

  • al.m..
    replied
    Click image for larger version

Name:	image.jpeg
Views:	0
Size:	1.24 MB
ID:	1229413

    Leave a comment:


  • al.m..
    replied
    Originally posted by stevem View Post
    interested in the vintage 1 hp, pics?
    I'll do my best to dig it out this week

    Leave a comment:


  • stevem
    replied
    interested in the vintage 1 hp, pics?

    Leave a comment:


  • beakie
    replied
    Al, I'm having trouble find the pulley I need

    I'll continue searching, I have a pulley that takes a tapered sheave, but not able to find the right sheave either so far.


    If someone else needs/wants it by all means don't hold it for me.

    Leave a comment:


  • beakie
    replied
    Originally posted by beakie View Post

    drat!
    well I had to try

    ok, I'm at work, but will check what sized shaft I require and will get back to you if this will work for me.

    that shaft is smaller than what I need, but let me see if I can find a pulley that will work... it shouldn't be a problem.

    Leave a comment:


  • beakie
    replied
    Originally posted by Rod Sheridan View Post
    I would use it.

    You can always carefully blow it out occasionally.....Rod
    I'll send you a pic of motor and spec plate

    thanks for motor info








    Al, would you like EMT $$ now or cash whenever I can make it down there?

    Leave a comment:


  • Rod Sheridan
    replied
    I would use it.

    You can always carefully blow it out occasionally.....Rod

    Leave a comment:


  • beakie
    replied
    Originally posted by Rod Sheridan View Post
    Good try.
    Too bad it’s a 2 pole, otherwise I might have considered it for my mill.
    If you’re OK with a DP motor the price looks good......Rod
    well I was thinking of putting it in a table saw, specifically the RT40 I have here. It has a dust shroud around the blade under the table, so very little dust makes it into the cabinet.

    thoughts?

    also, you need/want a 4pole (aka 1725rpm?)
    I have one I could part with

    Leave a comment:


  • Rod Sheridan
    replied
    Originally posted by beakie View Post

    drat!
    well I had to try

    ok, I'm at work, but will check what sized shaft I require and will get back to you if this will work for me.
    Good try.

    Too bad it’s a 2 pole, otherwise I might have considered it for my mill.

    If you’re OK with a DP motor the price looks good......Rod

    Leave a comment:


  • beakie
    replied
    Originally posted by al.m.. View Post
    the motor,yes
    drat!
    well I had to try

    ok, I'm at work, but will check what sized shaft I require and will get back to you if this will work for me.

    Leave a comment:


  • al.m..
    replied
    Originally posted by beakie View Post
    do I get everything as seen in the picture for $200??
    the motor,yes

    Leave a comment:


  • beakie
    replied
    do I get everything as seen in the picture for $200??

    Leave a comment:


  • al.m..
    replied
    Shaft on 5 hp is 3/4" Click image for larger version

Name:	image.jpeg
Views:	0
Size:	1.73 MB
ID:	1228854Click image for larger version

Name:	image.jpeg
Views:	0
Size:	1.58 MB
ID:	1228855

    Leave a comment:


  • beakie
    replied
    I'm interested in the RPM for the 5hp Al?
    also what style is it, if not TEFC?

    Leave a comment:

Working...
X