Announcement

Collapse
No announcement yet.

14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

    No time for woodworking due to an addition to the family.

    Upgraded wiring and switch.

    Pick up by Mccowan Road and 407 in Markham.

    $150
    Attached Files
  • Thread Continues Below...

  • #2

    Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

    Price drop $130. Need to make room for winter tires.

    Comment


    • #3

      Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

      Any brand info , an online manual ?
      How old is it? I am interested

      Comment


      • #4

        Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

        Unit is from Oscar's. Aside from that, I do not have much info. When I was updating the unit, I sourced out parts under the Delta brand as many 14" bandsaws from Taiwan were clones of it.

        Comment


        • #5

          Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

          Seems to be this one. Is it wired for 220v?
          SPECIFICATION
          90 kg
          49 × 65 × 168 cm
          OSCAR
          MJ 3435
          3/4 Hp
          750 Watt
          220 V
          152 mm
          350 mm
          352 x 352 mm
          2375 x 10 x 0.6 mm
          I just read your initial post again and you said you replaced the motor and the bearings
          What are the specs of the motor? Same? Did that change the power of the saw?
          I might not be able to move this with my Toyota, can it be handled by one person?
          Does it include the original pedestal? Is it on rollers as I have seen in a couple of pictures?
          the unit seems to be popular in Indonezia and around and to some degree in Australia as Timbercon 34-35
          Last edited by PF4Wood; 11-06-2019, 10:19 PM.

          Comment


          • #6

            Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

            Originally posted by PF4Wood View Post
            Seems to be this one. Is it wired for 220v?
            SPECIFICATION
            90 kg
            49 × 65 × 168 cm
            OSCAR
            MJ 3435
            3/4 Hp
            750 Watt
            220 V
            152 mm
            350 mm
            352 x 352 mm
            2375 x 10 x 0.6 mm
            I just read your initial post again and you said you replaced the motor and the bearings
            What are the specs of the motor? Same? Did that change the power of the saw?
            I might not be able to move this with my Toyota, can it be handled by one person?
            Does it include the original pedestal? Is it on rollers as I have seen in a couple of pictures?
            the unit seems to be popular in Indonezia and around and to some degree in Australia as Timbercon 34-35
            Hi, to put it in your car, take the table off, split the saw into upper and lower assemblies by removing the bolt that joins the 2 column sections together and then remove the lower section from the base.

            You now have 4 small pieces that you can lift and put in your car..........Rod.
            Kayhan likes this.
            Work is the curse of the riding class.

            Comment

            • Thread Continues Below...

            • #7

              Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

              Originally posted by Rod Sheridan View Post

              Hi, to put it in your car, take the table off, split the saw into upper and lower assemblies by removing the bolt that joins the 2 column sections together and then remove the lower section from the base.

              You now have 4 small pieces that you can lift and put in your car..........Rod.
              I thought I would do so but it seems baymoe put the saw up for sale in Kijiji for double the price :-) so I will have to pass now

              Comment


              • #8

                Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

                Online sales are weird. It seems to gather more interests when items are more in line with market price.

                In regards to the question about wiring and hp. It is wired for 120v. HP iirc is 1/2-3/4 hp.

                I forgot to mention that it comes with a mobile base. I'll toss in whatever additional blades if I can locate them.

                Attached Files

                Comment


                • #9

                  Re: 14" Taiwan-made Bandsaw - Bearing Guides/Leeson Motor

                  Mods, please close thread. Brother in law will be taking the unit.

                  Comment

                  Working...
                  X