Announcement

Collapse
No announcement yet.

Looking for a 220 volt 1 or 3-phase wide belt (not drum) sander

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bryan @ Woodstock
    replied
    Facebook, Toronto area 43" timesavers $12,500 Click image for larger version

Name:	43%22 sander.jpg
Views:	160
Size:	13.2 KB
ID:	1273116
    ​​​​​​https://www.facebook.com/marketplace...1079578256107/

    Leave a comment:


  • Doug G
    replied
    Bit of a hike for you Marty but is this what you are looking for?
    https://vancouver.craigslist.org/van...078080242.html
    Click image for larger version

Name:	00606_6EVTexL1otj_300x300.jpg
Views:	202
Size:	10.8 KB
ID:	1272952
    Attached Files

    Leave a comment:


  • Carlosinthesticks
    replied
    Originally posted by avalon443 View Post
    There is a 16" wide belt Bulldog sander with auto feed conveyor for sale under Machinery Section on govdeals. Unit is located at Georgian College in Barrie if this is large enough for your needs.

    George.
    And there is even 2 pictures of it above.

    Leave a comment:


  • avalon443
    replied
    There is a 16" wide belt Bulldog sander with auto feed conveyor for sale under Machinery Section on govdeals. Unit is located at Georgian College in Barrie if this is large enough for your needs.

    George.

    Leave a comment:


  • MartyFromKingston
    replied
    It's 600 volt unfortunately.

    Originally posted by Carlosinthesticks View Post
    Heres your machine Marty. https://www.govdeals.ca/index.cfm?fa...90&acctid=6536.

    Click image for larger version Name:	6536_90_2-1.jpg Views:	0 Size:	54.2 KB ID:	1272637

    Its 16" open sided with power feeds. This expensive machine is going to go cheap, why? its 600 volts, that might be a problem for you also. If the price is right might be worth investing in a transformer.

    Leave a comment:


  • Carlosinthesticks
    replied
    Heres your machine Marty. https://www.govdeals.ca/index.cfm?fa...90&acctid=6536.

    Click image for larger version  Name:	6536_90_2-1.jpg Views:	0 Size:	54.2 KB ID:	1272637

    Its 16" open sided with power feeds. This expensive machine is going to go cheap, why? its 600 volts, that might be a problem for you also. If the price is right might be worth investing in a transformer.
    Last edited by Carlosinthesticks; 02-28-2020, 01:46 PM.

    Leave a comment:


  • Beaverfever1988
    replied
    Not sure if you found a sander or not yet but i think this what your looking for.

    15” general sander. 30. ,
    https://www.kijiji.ca/v-power-tool/o...nt=app_android

    Leave a comment:


  • MartyFromKingston
    replied
    I called about the 12" Mini Wide Belt Sander (Open end, 24" max width capacity), https://www.kijiji.ca/v-power-tool/o...nt=app_android and don't think it was Igor I was speaking with. Regardless, that particular machine is more akin to a jointer, as the belt is on the bottom, located between two independently movable (up and down) tables. There is a feed roller on the top. Whatever amount of wood you wish to remove, you set the infeed table to; the outfeed table is set to the top of the sanding belt - again, just as you would if it were a jointer.

    The owner and I both concluded that it wasn't at all what I was looking for, so I declined to make an offer. So Jason, thanks for looking out for price drops for me, but I'm not interested in this machine.

    For everyone, here's a better description of what I'm looking for: a 15" open sided widebelt sander in working order with 220 volt motors, selling for the sub $2,500 range.
    Last edited by MartyFromKingston; 12-03-2019, 03:12 PM.

    Leave a comment:


  • MartyFromKingston
    replied
    I called about the 12" Mini Wide Belt Sander (Open end, 24" max width capacity), https://www.kijiji.ca/v-power-tool/o...nt=app_android and don't think it was Igor I was speaking with. Regardless, that particular machine is more akin to a jointer, as the belt is on the bottom, located between two independently movable (up and down) tables. There is a feed roller on the top. Whatever amount of wood you wish to remove, you set the infeed table to; the outfeed table is set to the top of the sanding belt - again, just as you would if it were a jointer.

    The owner stated that it wasn't at all what I was looking for, so I declined to make an offer. So Jason, thanks for looking out for price drops for me, but I'm not interested in this machine. If, however, you come across something along the lines of what I'm looking for, then by all means, please let me know.

    Leave a comment:


  • nnieman
    replied
    Originally posted by Beaverfever1988 View Post
    Not sure if this is what your looking for, its a small open ended machine. Also not 220v but maybe cheap enough to swap motors?


    12" Mini Wide Belt Sander (Open end, 24" max width capacity).,
    https://www.kijiji.ca/v-power-tool/o...nt=app_android

    Is there a size and price range your looking for? I check Kijiji for belt sanders every few hours so i can keep an eye out.
    I believe that belongs to igor Igor Vasilenko

    Nathan

    Leave a comment:


  • Beaverfever1988
    replied
    Not sure if this is what your looking for, its a small open ended machine. Also not 220v but maybe cheap enough to swap motors?


    12" Mini Wide Belt Sander (Open end, 24" max width capacity).,
    https://www.kijiji.ca/v-power-tool/o...nt=app_android

    Is there a size and price range your looking for? I check Kijiji for belt sanders every few hours so i can keep an eye out.

    Leave a comment:


  • MartyFromKingston
    replied
    Thanks for that legwork, Leo, but most of these aren't the style I'm looking for. The fourth one you found is the closest, but it's unfortuantely not 220 volt so it's out for me.

    I guess I'll have to keep on looking!

    Originally posted by Leo Van Der Loo View Post
    I’m not really sure which kind of belt sander Marty wants, but I had a look earlier before going to watch my smaller grandkids play ringette, anyway there are several wide belt sanders on KIJIJI, while some would be called edge sanders, or stroke sanders, they do use wide belts and then there are the humongous sized ones, I see Brian is showing one of he medium size ones.

    https://www.kijiji.ca/v-power-tool/b...7508?undefined

    https://www.kijiji.ca/v-power-tool/c...3940?undefined

    https://www.kijiji.ca/v-power-tool/c...0959?undefined

    https://www.kijiji.ca/v-power-tool/s...der/1474286757

    https://www.kijiji.ca/v-power-tool/l...5300?undefined

    https://www.kijiji.ca/v-power-tool/o...6692?undefined

    https://www.kijiji.ca/v-other-busine...8541?undefined

    https://www.kijiji.ca/v-other-busine...svByLDXLtRyJyK

    Leave a comment:


  • iamtooler
    replied
    I just had to get mine home as the storage facility it was in was sold to the township. It was rebuilt by Tremzaction , ready for service and never used in 1995! They had 40 millwrights servicing the furniture industry in Quebec. It has 1 drum, 40hp and two platens, 30 and 20hp with a 10hp belt feed for a total od 100hp. It would require 400amps on single phase and weighs about 10000lbs. I am thinking of building a trailer under it as it is difficult to move and more than 8' high. It is a 37'' x 75'' belt size. FWIW it was listed at 28,500$ when I bought it at auction for much less.
    I am open to offers!
    Rob
    Last edited by iamtooler; 12-01-2019, 10:05 PM.

    Leave a comment:


  • Leo Van Der Loo
    replied
    I’m not really sure which kind of belt sander Marty wants, but I had a look earlier before going to watch my smaller grandkids play ringette, anyway there are several wide belt sanders on KIJIJI, while some would be called edge sanders, or stroke sanders, they do use wide belts and then there are the humongous sized ones, I see Brian is showing one of he medium size ones.

    https://www.kijiji.ca/v-power-tool/b...7508?undefined

    https://www.kijiji.ca/v-power-tool/c...3940?undefined

    https://www.kijiji.ca/v-power-tool/c...0959?undefined

    https://www.kijiji.ca/v-power-tool/s...der/1474286757

    https://www.kijiji.ca/v-power-tool/l...5300?undefined

    https://www.kijiji.ca/v-power-tool/o...6692?undefined

    https://www.kijiji.ca/v-other-busine...8541?undefined

    https://www.kijiji.ca/v-other-busine...svByLDXLtRyJyK

    Leave a comment:


  • iamtooler
    replied
    I have never met anybody who was happy with an open sided sander. I suppose if you used it like a drum sander it would be ok but as the paper wears you can generate a lot of pressure under the roller.

    Leave a comment:

Working...
X