Announcement

Collapse
No announcement yet.

Part Wanted

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Part Wanted

    Hi Everyone, new member here.

    I am looking for a Crank Assembly for a 10 inch Sears Craftsman Radial Arm Saw, part number 63434. This is the handle that fits on the shaft located under the front of the table that allows you to raise and lower the saw blade. the Model Number of the saw is 113.197602C, serial number 3039.MO611.

    Thanks
  • Thread Continues Below...

  • #2

    Re: Part Wanted

    If no luck here, one of the Busy Bee hand wheels might work.


    https://www.busybeetools.com/search?q=hand+wheel

    Comment


    • #3

      Re: Part Wanted

      thanks for the suggestion, I will keep it in mind.

      Comment


      • #4

        Re: Part Wanted

        FWIW, here's a manual for the non-C version. It has a decent picture of the handle in the parts list ::

        113.196702.PDF

        Comment


        • #5

          Re: Part Wanted

          Thanks for the manual, it will be a great help with the operation of the saw.

          Comment


          • #6

            Re: Part Wanted

            try this guy

            lou 905-401-5903
            he will have it exactly

            Comment

            • Thread Continues Below...

            • #7

              Re: Part Wanted

              So something like this... Had purchased this RAS base for $20 with a non working motor, was going us it and Frankenstein my drum sander into a different setup. But plans changed and was going to metal recycle this. Need the whole thing? Where in Hamilton are you. I am in Fort Erie and passing through Friday to pickup something in T.O.


              Glen Black

              Comment


              • #8

                Re: Part Wanted

                Looks like Lou has the part I need, thanks everyone for your help.

                Comment

                Working...
                X