Announcement

Collapse
No announcement yet.

Need leveler pin for my Delta 14" bandsaw - FOUND

Collapse
This topic is closed.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Need leveler pin for my Delta 14" bandsaw - FOUND

    Got a nice used 1992 28-203 14" Delta bandsaw last week but it is missing the table levelling pin. Anyone got one kicking around?

  • #2

    Re: Need leveler pin for my Delta 14" bandsaw - FOUND

    Re: Need leveler pin for my Delta 14" bandsaw

    Kerfin

    I lost mine last year rather than wait forever to order one I measured the hole with calipers and matched it to the shank of an old drill bit which I cut down using a cut off disc and rounded the ends with a grinder. All in all a 15 minute job. You would never know if I didn't tell you.

    Yogi
    Have a good day and play safe!!!!!!!

    Comment


    • #3

      Re: Need leveler pin for my Delta 14" bandsaw - FOUND

      Re: Need leveler pin for my Delta 14" bandsaw

      Thanks Yogi - I ended up ordering one on eBay and it's perfect.

      Comment

      Working...
      X