Announcement

Collapse
No announcement yet.

Seeking Craftsman 10-inch Radial Saw Table Dimensions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Seeking Craftsman 10-inch Radial Saw Table Dimensions

    Hello and thank you for your time.

    I have a radial saw but it was sold (used) with a flimsy and incorrectly measured homemade replacement table.

    If anyone might have one of these Craftsman radial saws, I would greatly appreciate it if you could measure the table and any sleeves or other parts that I could cut for myself.

    The specific model number is 113.19772C. Thanks!
  • Thread Continues Below...

  • #2

    Re: Seeking Craftsman 10-inch Radial Saw Table Dimensions

    I'm in Comox and have that saw in model 113.19761C. It has the revised table for the safety mods to the guards that were provided several years ago.

    PM me if you want to come have a look and measure for yourself.
    DrunkAngel likes this.

    Comment


    • #3

      Re: Seeking Craftsman 10-inch Radial Saw Table Dimensions

      Use 3/4 in” plywood and fit to suit yourself. Top it with 1/4 in” plywood as an expendable surface. Paint & wax the top.

      making the top larger gives for more support and working surface.
      DrunkAngel likes this.
      Egon
      from
      The South Shore, Nova Scotia

      Comment


      • #4

        Re: Seeking Craftsman 10-inch Radial Saw Table Dimensions

        I have a 113.199200C. My table top is 40" wide, 9" behind the fence, and 18" in front of the fence.
        DrunkAngel likes this.
        Happiness is a new blade!

        Comment

        Working...
        X