Announcement

Collapse
No announcement yet.

Used Unisaw

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Used Unisaw

    Unless something goes terribly wrong I may be picking up a Unisaw for $200!
    Waiting to hear if it's 1 ph or 3 ph.
    https://www.usedvictoria.com/ReportS...osition=1&hb=1
    Last edited by DavidR8; 09-25-2019, 06:49 PM.
  • Thread Continues Below...

  • #2

    Re: Used Unisaw

    It's a single phase motor and the owner is going to drop it off at my house!

    Comment


    • #3

      Re: Used Unisaw

      Can’t get much better than that.
      DavidR8 likes this.

      Comment


      • #4

        Re: Used Unisaw

        Holy cow! I paid more than that for a Unifence alone! What a great deal.
        DavidR8 likes this.
        The difference between a master and a beginner: The master has failed more times than the beginner has even tried.

        Comment


        • #5

          Re: Used Unisaw

          Score!
          Serial number UU1578 now lives at my house.
          52 in. Unifence. 3 hp. Extension table legs.

          Came from a sign shop that got caught with no guards on the saw.
          They could not find a guard so decided to get rid of it.

          I will sell my 2200 and 6201 and likely end up paying less than $100 for this baby!
          I am so excited.
          It is my dream saw and will keep my all original 2300 bandsaw company.


          Sent from my iPhone using Tapatalk
          Last edited by DavidR8; 09-25-2019, 07:02 PM.
          iamtooler likes this.

          Comment


          • #6

            Re: Used Unisaw

            Buy a fence,get a free saw,not bad!
            DavidR8 likes this.

            Comment

            • Thread Continues Below...

            • #7

              Re: Used Unisaw

              Originally posted by al.m.. View Post
              Buy a fence,get a free saw,not bad!
              I am in a bit of shock to be honest. A few weeks back I missed a Unisaw for $100. Seriously. $100.
              I was totally bummed about that.
              I am so glad I hit “refresh” on UsedVictoria when I did. The ad had been up for 20 minutes.


              Sent from my iPhone using Tapatalk

              Comment


              • #8

                Re: Used Unisaw

                Nothing wrong with a unfence and that saw is only slightly newer than mine. It's got the cast iron plinth base.
                Last edited by Rusty; 09-25-2019, 08:16 PM.
                DavidR8 likes this.

                Comment


                • #9

                  Re: Used Unisaw

                  And if you got the goose egg/motor cover that’s sitting under the fence extension on the right, you could sell it for more than you bought the saw! ;-)

                  Comment


                  • #10

                    Re: Used Unisaw

                    Originally posted by Coop42 View Post
                    And if you got the goose egg/motor cover that’s sitting under the fence extension on the right, you could sell it for more than you bought the saw! ;-)
                    Yup I got the motor cover too :-)
                    The 52 in. fence is going to be a challenge in my 20’ x 20’ garage though!


                    Sent from my iPhone using Tapatalk

                    Comment


                    • #11

                      Re: Used Unisaw

                      Got the beast into my rolling stand tonight so I can keep it out of the way for the moment.



                      Sent from my iPhone using Tapatalk

                      Comment

                      • Thread Continues Below...

                      • #12

                        Re: Used Unisaw

                        Looks rough, but at that price, nobody would mind putting some hours into cleaning it up. Can it be fitted with a Shark guard?

                        Comment


                        • #13

                          Re: Used Unisaw

                          David if that saw has steel handles on the up, down and tilt wheels it is the same vintage as mine. The first pic looked like black handles. Please don't mess with that fence, if you got the unfence with the saw, in terms of replacement until you actually know all of it's features. I don't have one but it is a damn good fence. Slides and flips etc. You will learn to love it.

                          Comment


                          • #14

                            Re: Used Unisaw

                            52'' rails or 52'' cut to right of blade? I do not like to have to walk around very wide saws to collect the cut off pieces but 52'' rails would be a shame to cut down.
                            Rob

                            Comment


                            • #15

                              Re: Used Unisaw

                              Originally posted by Rusty View Post
                              David if that saw has steel handles on the up, down and tilt wheels it is the same vintage as mine. The first pic looked like black handles. Please don't mess with that fence, if you got the unfence with the saw, in terms of replacement until you actually know all of it's features. I don't have one but it is a damn good fence. Slides and flips etc. You will learn to love it.
                              IMO the Unifence is about the best you can get. There are those who lean toward the Bies with ample justification so it's probably a toss up.. Good advise to clean it up and play with it for a while before deciding.
                              The difference between a master and a beginner: The master has failed more times than the beginner has even tried.

                              Comment

                              Working...
                              X