Announcement

Collapse
No announcement yet.

Simple mount idea, grinders/ small disc/ bent sanders etc

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Simple mount idea, grinders/ small disc/ bent sanders etc

    Click image for larger version

Name:	image.jpeg
Views:	81
Size:	1.41 MB
ID:	1260754 I have a crappy cabinet for my bench grinder and belt disc sander combo.One gets tired below,the last one used stays on top.tends to collect junk the tools vibrate and move around when in use.like any vertical shop serface,and eats up precious space.Cabinet is getting tossed. I made a couple brackets out of scraps of 3/4" ply,tee shaped ,dado end,glued and screwed,installed tee nuts to suit the tools bolt patern and bolted the grinder and sander unit each onto one.now when needed,pop int the vice,nice stable ,easy to stow under the bench when done. Click image for larger version

Name:	image.jpeg
Views:	87
Size:	1.24 MB
ID:	1260753
    beachburl and nnieman like this.
  • Thread Continues Below...

  • #2

    Re: Simple mount idea, grinders/ small disc/ bent sanders etc

    Looks like a good solution I have my grinder, drill press and belt/disc sander on a cabinet with storage below. Works well for me, occasionally one gets in the way of another but most of the time it works. I do have a mini work surface about 16" square with a cleat on the bottom like yours which I clamp in my vice to work on small parts so I don't need to bend over as far.

    Comment

    Working...
    X