Announcement

Collapse
No announcement yet.

Band Saw Mitre Gauge

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Band Saw Mitre Gauge

    I have a Beaver Delta 16 inch band saw model number 28-540. I am looking for the band saw mitre gauge for this saw, any ideas where I can buy one?
  • Thread Continues Below...

  • #2

    Re: Band Saw Mitre Gauge

    Any standard or aftermarket mitre gauge should fit unless it has an oddball slot. The bars on my SawStop, Taiwanese table saw from the early 80's, and Osborne, older General and Rockwell mitre gauges are all the same and fit my Craftex 20" bandsaw as well as the saws. So if your slot is 3/4" wide and about 3/8" deep on the bandsaw use whatever you can find new or used.

    Pete

    PS. Ignore me if you are after an original branded to the machine mitre gauge.

    Comment

    Working...
    X