Announcement

Collapse
No announcement yet.

Router bit Brain Cramp

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Router bit Brain Cramp

    Hello All:

    I need to rout a bullnose on the front edge of some shelves that are 4/4. Is there such a thing as a 1" bullnose router bit? I'm not real good with radii, so maybe I'm looking for the wrong thing...don't have a clue !!! Can anybody help?

  • #2

    Re: Router bit Brain Cramp

    Humberman

    Is this what you're looking for? http://www.leevalley.com/wood/page.a...58&cat=1,46168

    Blaine
    "Congratulations. You've just figured out the most complicated way to hold a board 30 inches off the floor."
    Tage Frid

    Comment


    • #3

      Re: Router bit Brain Cramp

      Freud makes a 1" bullnose bit, the part number is #18-126
      Last edited by sparky from winnipeg; 04-14-2008, 07:23 PM.
      The Bitterness of Poor Quality Lingers Long after the Cheap Price is Forgotten!!!!!

      Comment


      • #4

        Re: Router bit Brain Cramp

        Router Bit Braincramp

        Gentlemen:

        Thank you. I checked both the Lee Valley and Freud catalogs and didn't see either of those. Duh!!

        Comment


        • #5

          Re: Router bit Brain Cramp

          Or use a 1/2" roundover bit with a fence on the router table.

          Cheers, Don
          Don Kondra - Furniture Designer/Maker
          Product Photography
          My Acreage Bird Photographs

          Comment


          • #6

            Re: Router bit Brain Cramp

            Use a " quarter round router bit on each side and this will give you a bull nose. This is how I do-it and believe me, I do alot of bull nose moldings

            Comment

            Working...
            X