Announcement

Collapse
No announcement yet.

using the drawing VI to digitize a diagram and cnc engrave it

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • using the drawing VI to digitize a diagram and cnc engrave it

    https://youtu.be/LPsEcj93apw tracing the bald eagle using the drawing board VI high accuracy
    schor and jaywood1207 like this.
  • Thread Continues Below...

  • #2

    Re: using the drawing VI to digitize a diagram and cnc engrave it

    What actual woodworking is involved here? Maybe some sanding and finishing? I really don't know
    "Do it Right!"

    Comment


    • #3

      Re: using the drawing VI to digitize a diagram and cnc engrave it

      Woodman08 can you please provide answers to my questions and at the same time answer the following.

      Do you sell your work? Do you do custom work? Would you take on a commission? Can you or have you ever done Photographs. If so do you have samples that you could post? Do you only do the drawings and maybe programming? Not sure if I'm asking the right questions. As mentioned above I don't know much about the actual process.
      "Do it Right!"

      Comment


      • #4

        Re: using the drawing VI to digitize a diagram and cnc engrave it

        I do sell my work,I do custom work ,and I would consider a commission , I have lots of photography
        And I do digitizing for people, companies that do not need to buy a board will ask me to digitize there templates
        Let me know what you need

        Comment


        • #5

          Re: using the drawing VI to digitize a diagram and cnc engrave it

          Thank you.
          "Do it Right!"

          Comment


          • #6

            Re: using the drawing VI to digitize a diagram and cnc engrave it

            cnc is woodworking, woodworking with a computer

            Comment

            • Thread Continues Below...
            Working...
            X