Announcement

Collapse
No announcement yet.

Wheel nut for Rockwell bandsaw

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wheel nut for Rockwell bandsaw

    I purchased a Rockwell Model 14 bandsaw, and while going through it I have discovered that the nut that holds the lower wheel on is missing. The shaft measures 0.786"/25/32"/19.96mm in diameter with a fine thread. I have found a parts diagram that shows the nut as part number LBS-86 (0.802" - 28 TPI Jam Nut - 3/8" thick. The nut on the other end of the shaft is the same as the missing one. Does anyone have a parts saw that has one of these nuts that I could buy?
  • Thread Continues Below...
Working...
X