Announcement

Collapse
No announcement yet.

Spray System HVLP reccomendations

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Spray System HVLP reccomendations

    ok i am asking for your thoughts on a hvlp system. and why you like or use what yu do, also how do you get into tight areas like small cabinets ..outside work most any size works but inside tight spaces yu need something else, from what i have seen so far..and i need to get in to smaller ares than i can with my present time Gravity feed hvlp conversion gun.. what is your needle size prefernce for your work?
    48
    Compressor
    4.17%
    2
    Turbine
    27.08%
    13
    Gravity feed
    14.58%
    7
    Bottom feed
    6.25%
    3
    Pressure pot
    4.17%
    2
    Detail gun
    2.08%
    1
    Regular gun
    8.33%
    4
    1.1 nozzle set
    8.33%
    4
    1.4 nozzle set
    16.67%
    8
    1.8 nozzle set
    8.33%
    4

    The poll is expired.

    If in Doubt build it Stout.
    One hand washes the other.

  • #2

    Re: Spray System HVLP reccomendations

    Re: Spray System HVLP reccomendations

    Most times if the cabinet is real small
    I'll paint the parts , before putting them together
    I spray just about everything
    my needles go from .5 to 3.0 , using the 1.5 ad 2.0
    the most , I use Turbinaires 1265's

    Comment


    • #3

      Re: Spray System HVLP reccomendations

      Re: Spray System HVLP reccomendations

      For most jobs ( small items I make in my hobby shop, like coffee & end tables,doll furniture, etc ) I use a cheapo Wagner turbine I bought long ago. Plastic gun looks like the one with the PA turbine. I do have the optional needle set for it, but no idea the #, I think it was one size smaller than the standard set. For the occasional Large job I use an air assist airless system ( kitchen cabinets, beds, large cabinets, etc). Any cabinets that have to have the inside sprayed, I make the back panel removable. I occasionally spray poly or WB lacquer. 90% of the time , it's lacquer products.
      IMG_3818-1.jpg
      sigpic
      hobby woodworking since 1972

      Comment


      • #4

        Re: Spray System HVLP reccomendations

        Re: Spray System HVLP reccomendations

        i have a pressure pot system that i am tryun to get dialed in to work. it has a smaller overall size to it so i can get inside better.. byran has given me some insight on what i need to get it set up for lacquer and i thank him for his help.. need to check on the needle size.. wysong what are the different sized needles that yu have primary useage..never heard of a .5 that got to be some real fine liguide, dye maybe?
        If in Doubt build it Stout.
        One hand washes the other.

        Comment


        • #5

          Re: Spray System HVLP reccomendations

          Re: Spray System HVLP reccomendations

          Where possible I prefinish. I think spraying in confined spaces/ cabinets is a nightmare plus if you have a problem its damn hard to refinish, rub back etc if its already a box etc. To answer your poll it also hugely depends on what you are actually finishing with - lacquer, latex etc
          Cheers

          Tim

          www.timbowdin.com

          'If you can't fix it with a hammer, you've got an electrical problem'

          Comment


          • #6

            Re: Spray System HVLP reccomendations

            Re: Spray System HVLP reccomendations

            Originally posted by timberdoodle View Post
            i have a pressure pot system that i am trying to get dialed in to work. it has a smaller overall size to it so i can get inside better.. Byran has given me some insight on what i need to get it set up for lacquer and i thank him for his help..
            Get some large sheets of brown corrugated cardboard, excellent for checking the guns spray pattern. For test sheets to practice spraying on, get some 1/4" x 4'x8' luan floor underlay cut up into 2x2's. You also should have a spray table and a couple of shop made turn tables to work off of.
            sigpic
            hobby woodworking since 1972

            Comment


            • #7

              Re: Spray System HVLP reccomendations

              Re: Spray System HVLP reccomendations

              Get one of the so called "Touchup guns" from the manufacturers for the auto industry - Sharpe, SATA etc. Also available at Harbor Freight if that is the quality you want. The term Touch Up is misleading - on an auto it is that small area as you might define - a fender, door, etc. - on small cabinets inside tight areas etc. it is prefect. Add a 2 liter pot and it is a larger scale use such a making a bunch of small access cabinets as well as no cup. Needle size varies with make and model and paint product used. Work on air compressor, 29 lbs at gun

              WW

              Comment

              Working...
              X