No announcement yet.

Two new Medallion Pens

  • Filter
  • Time
  • Show
Clear All
new posts

  • Two new Medallion Pens

    Here are the two new medallion pens. both are curly maple with maple burl inserts and a veneer border. Both are baron kits, one without the brass/gold cap. the blackwood cap and finial need a little work!

    the additional piece of maple on one end of the blanks is to protect the maple burl endpiece during drilling

    this is the drill press setup for doing the round cutouts in the sides of the blank

    and the same jig turned to cut the inserts with a hole saw. the hole saw is a 2 inch and the forstner bit for the cutout is 1 7/8

    Gvax, KenL and Egon like this.
    my shop is a beaver lodge
    steve, sarnia, ont

    1940's Craftmaster Lathe
  • Thread Continues Below...