Announcement

Collapse
No announcement yet.

Frame for painting

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Frame for painting

    The lady I finished the mantle for last week, gave me the oak cut offs from that project.
    I am going to be producing a frame for painting she has done, from those cut offs.

    Click image for larger version

Name:	fullsizeoutput_338.jpeg
Views:	1
Size:	1.64 MB
ID:	1217789
    Oak pieces 12-13" W x 30-36" L x 2.5-3" T

    Click image for larger version

Name:	fullsizeoutput_339.jpeg
Views:	1
Size:	1.96 MB
ID:	1217790
    Oak billets roughed out for the frame pieces.
    Painting canvas is 3/4" T, Moulding profile is approx. 1.5" T

    Have a great week, everyone.
    woodguy7, nnieman and 2 others like this.
    https://www.red9designs.ca
  • Thread Continues Below...

  • #2

    Re: Frame for painting

    Built this this week, to help with machining the profile for the picture frame.
    Bought a fancy cast router table top and a woodpeckers lift, many years ago.
    Both work great just never got around to the fence or a cabinet.
    Thanks to Lee Valley for the dust chute, and 1/4-20 knobs.
    Front of the fence has holes for more 1/4-20 bolts an knobs for zero clearance attachments.
    Have a great coming week everyone.

    Click image for larger version

Name:	fullsizeoutput_33a.jpeg
Views:	1
Size:	1.51 MB
ID:	1218812
    woodguy7 and Wally in Calgary like this.
    https://www.red9designs.ca

    Comment


    • #3

      Re: Frame for painting

      First piece of the profile is a done with 3 or 4 passes over a core box bit.

      Click image for larger version

Name:	IMG_1183.JPG
Views:	1
Size:	1.27 MB
ID:	1219110

      Second bit of the profile was done with 2 passes over a 1/2" round over bit.

      Click image for larger version

Name:	fullsizeoutput_33e.jpeg
Views:	1
Size:	1.73 MB
ID:	1219111

      Have a good week.
      https://www.red9designs.ca

      Comment


      • #4

        Re: Frame for painting

        Third pass, 1/2 Dia. Core box bit.

        Click image for larger version  Name:	IMG_1187.JPG Views:	1 Size:	947.8 KB ID:	1220020

        Fourth pass, chair rail bit.

        Click image for larger version  Name:	fullsizeoutput_343.jpeg Views:	1 Size:	1.76 MB ID:	1220021

        Fifth & final pass, 1/2" Dia. core box bit again.

        Click image for larger version  Name:	fullsizeoutput_344.jpeg Views:	1 Size:	1.59 MB ID:	1220022

        Click image for larger version

Name:	fullsizeoutput_345.jpeg
Views:	1
Size:	1.48 MB
ID:	1220023

        Next, the rabbets/rebates for the painting canvas, and the retaining hardware.
        Also remove some of the wood on the back side to make it a little lighter.
        Then sanding sanding sanding, everyones favourite.
        Have a great weekend.
        Last edited by Maxwell; 01-19-2019, 05:57 PM.
        Glenn from Winnipeg, and 2 others like this.
        https://www.red9designs.ca

        Comment


        • #5

          Re: Frame for painting

          Nice work. Thanks for posting. It’s nice to see the progression

          Comment


          • #6

            Re: Frame for painting

            Nice to see these projects/tutorials coming back. Nice work. Thanks for posting.
            Nothing is ever as straightforward as it seems.

            Glenn from Winnipeg

            Comment

            • Thread Continues Below...
            Working...
            X