Announcement

Collapse
No announcement yet.

Frame for painting

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Roy in Thunder Bay
    replied
    I preferred the frame with the natural colour, but the customer must be respected. Very nice work. Roy

    Leave a comment:


  • Maxwell
    replied
    My sister-inlaw wanted the frame stained,
    So here it is, I finished it last night.

    Stained.
    Click image for larger version

Name:	fullsizeoutput_34f.jpeg
Views:	110
Size:	1.49 MB
ID:	1240063
    Finished.
    Click image for larger version

Name:	fullsizeoutput_353.jpeg
Views:	108
Size:	2.46 MB
ID:	1240064
    Complete.
    Click image for larger version

Name:	fullsizeoutput_356.jpeg
Views:	109
Size:	1.20 MB
ID:	1240065
    Have a great weekend everyone.
    Attached Files

    Leave a comment:


  • MartyFromKingston
    replied
    I really liked your router table and how you're set up the fence: simple and effective.

    Leave a comment:


  • Woodwreck
    replied
    Yes, great photography, also like the included snips of your studio.

    Leave a comment:


  • Maxwell
    replied
    Originally posted by bkrits View Post
    I would guess the lady will be well pleased with that, all her friends will hear about you. well done.
    I like that you ran the 5th piece of wood I presume as you set up piece.
    Yes the lady / artist is my sister in law, I hope she will be happy with it.
    Also yes the fifth piece was my setup block / reserve if I screwed up, somewhere along the way.
    Thank you, have a great coming week.

    Leave a comment:


  • John Bartley
    replied
    Great series of photos and story ! Frame looks good and so does the painting. I'm a sucker for paintings by unknown artists

    Leave a comment:


  • bkrits
    replied
    I would guess the lady will be well pleased with that, all her friends will hear about you. well done.
    I like that you ran the 5th piece of wood I presume as you set up piece.

    Leave a comment:


  • Maxwell
    replied
    Mitres are done, and the painting fits.
    Enjoy today.

    Click image for larger version

Name:	fullsizeoutput_34b.jpeg
Views:	109
Size:	1.49 MB
ID:	1239483

    Leave a comment:


  • bkrits
    replied
    Very nice

    Leave a comment:


  • Maxwell
    replied

    Today I ran the rebate for the painting and 20 deg bevel on the inside edge.
    Here's a sneak peek at the first mitre.
    Have a happy Sunday.
    Click image for larger version

Name:	fullsizeoutput_34a.jpeg
Views:	109
Size:	1.62 MB
ID:	1239401

    Leave a comment:


  • Glenn from Winnipeg
    replied
    Nice to see these projects/tutorials coming back. Nice work. Thanks for posting.

    Leave a comment:


  • rangerdave1
    replied
    Nice work. Thanks for posting. It’s nice to see the progression

    Leave a comment:


  • Maxwell
    replied
    Third pass, 1/2 Dia. Core box bit.

    Click image for larger version  Name:	IMG_1187.JPG Views:	1 Size:	947.8 KB ID:	1220020

    Fourth pass, chair rail bit.

    Click image for larger version  Name:	fullsizeoutput_343.jpeg Views:	1 Size:	1.76 MB ID:	1220021

    Fifth & final pass, 1/2" Dia. core box bit again.

    Click image for larger version  Name:	fullsizeoutput_344.jpeg Views:	1 Size:	1.59 MB ID:	1220022

    Click image for larger version

Name:	fullsizeoutput_345.jpeg
Views:	107
Size:	1.48 MB
ID:	1220023

    Next, the rabbets/rebates for the painting canvas, and the retaining hardware.
    Also remove some of the wood on the back side to make it a little lighter.
    Then sanding sanding sanding, everyones favourite.
    Have a great weekend.
    Last edited by Maxwell; 01-19-2019, 05:57 PM.

    Leave a comment:


  • Maxwell
    replied
    First piece of the profile is a done with 3 or 4 passes over a core box bit.

    Click image for larger version

Name:	IMG_1183.JPG
Views:	108
Size:	1.27 MB
ID:	1219110

    Second bit of the profile was done with 2 passes over a 1/2" round over bit.

    Click image for larger version

Name:	fullsizeoutput_33e.jpeg
Views:	109
Size:	1.73 MB
ID:	1219111

    Have a good week.

    Leave a comment:


  • Maxwell
    replied
    Built this this week, to help with machining the profile for the picture frame.
    Bought a fancy cast router table top and a woodpeckers lift, many years ago.
    Both work great just never got around to the fence or a cabinet.
    Thanks to Lee Valley for the dust chute, and 1/4-20 knobs.
    Front of the fence has holes for more 1/4-20 bolts an knobs for zero clearance attachments.
    Have a great coming week everyone.

    Click image for larger version

Name:	fullsizeoutput_33a.jpeg
Views:	110
Size:	1.51 MB
ID:	1218812

    Leave a comment:

Working...
X