Announcement

Collapse
No announcement yet.

Vacuum Press

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Vacuum Press

    Looking for the most economical / best way to get a vacuum press for veneering. Would the excel 5 from Woodworking supplies be the best option? I only have a pancake compressor currently so I have to take that into consideration. Any tips would be appreciated.
  • Thread Continues Below...

  • #2

    Re: Vacuum Press

    Seems like a decent set up, I buy my polyurethane bags from Joe.
    A venturi is the cheapest, but you have to have a 100% duty cycle compressor to provide a constant flow of air.
    I have this one.
    https://vac-u-clamp.com/product/pro-...m-pump-system/
    Here is another option.
    https://www.vacupress.com/product/co...acupress-pump/

    It is an expensive bit of kit, for only occasional use, but it sure is handy.
    Good luck, and have a good week.
    https://www.red9designs.ca

    Comment


    • #3

      Re: Vacuum Press

      How big of a piece are you looking to press?
      Steven Der-Garabedian
      www.blackwalnutstudio.ca
      info@blackwalnutstudio.ca

      Comment

      Working...
      X