plywood table - does it need support?

[Andrew_K99]

Re: plywood table - does it need support?

Well I'll disagree with jay, it'll work if you don't put anything on it

Joking aside, you will need support of some type. What is the table for? Is there a reason you don't want to add supports?

AK

[jay]

Re: plywood table - does it need support?

Hi everyone, I am really new at this but I wanted to ask a question
I am building a table out of 6 x 2.5 x 3/4 plywood and I plan on supporting it only by its 4 corners.
will that be enough?

thanks in advance!

Yes if ALL the dimensions are inches .NO if the first two are feet I would suggest a 3 7/8 inch apron round the table and two cross braces of the same size.If you cut under the round number of inches by the blade kerf the plywood is cut less waste.

[Assaf601]

Hi everyone, I am really new at this but I wanted to ask a question
I am building a table out of 6 x 2.5 x 3/4 plywood and I plan on supporting it only by its 4 corners.
will that be enough?

thanks in advance!