Where can I find a good 220V remote controlled switch in Canada for my Dust Collector?
Announcement
Collapse
No announcement yet.
220v remotes
Collapse
X
-
Re: 220v remotes
https://www.busybeetools.com/product...ctor-220v.html
I have had this one for many years. Works as it should.
Comment
-
Re: 220v remotes
Originally posted by [Scott] View Posthttps://www.busybeetools.com/product...ctor-220v.html
I have had this one for many years. Works as it should.Cheers
Randy
Comment
-
Re: 220v remotes
I bought into the iVAC system.
https://www.kmstools.com/ivac-pro-sw...-20-amps-20039
I have the ~$50 remote and two ~$70 sensors. Automatically turns on when I turn on the table saw and the mitre saw. Manually have to push a button on a garage-door-opener type remote otherwise. No complaints. Probably was a waste to get the sensors, since I still have to remember to go open and close blast gates.
Comment
-
Re: 220v remotes
Originally posted by [Scott] View Posthttps://www.busybeetools.com/product...ctor-220v.html
I have had this one for many years. Works as it should.
Mike
Comment
-
Re: 220v remotes
Other product to consider:
iVAC PRO 240-Volt Remote Control For Dust Collectors: Amazon.ca: Tools & Home Improvement
I have used a iVAC product for years except it is one that senses the current to a tool plugged into it and then turns on the vacuum or DC or whatever. Works fine.
billh
Comment
Thread Continues Below...
Thread Continues Below...
Comment