FREE SAMPLE ISSUE FREE NEWSLETTER DIGITAL ISSUE PREVIEW

Results 1 to 6 of 6

Thread: Router bit Brain Cramp

  1. #1
    Join Date
    Feb 2006
    Location
    Claremont, Ontario
    Posts
    119
    Real Name
    Steve Flude

    Default Router bit Brain Cramp

    Hello All:

    I need to rout a bullnose on the front edge of some shelves that are 4/4. Is there such a thing as a 1" bullnose router bit? I'm not real good with radii, so maybe I'm looking for the wrong thing...don't have a clue !!! Can anybody help?

  2. #2

    Default

    Humberman

    Is this what you're looking for? http://www.leevalley.com/wood/page.a...58&cat=1,46168

    Blaine
    "Congratulations. You've just figured out the most complicated way to hold a board 30 inches off the floor."
    Tage Frid

  3. #3
    Join Date
    Feb 2006
    Location
    UH, Winnipeg!!!
    Posts
    919
    Real Name
    Michael

    Default

    Freud makes a 1" bullnose bit, the part number is #18-126
    Last edited by sparky from winnipeg; 04-14-2008 at 06:23 PM.

  4. #4
    Join Date
    Feb 2006
    Location
    Claremont, Ontario
    Posts
    119
    Real Name
    Steve Flude

    Default Router Bit Braincramp

    Gentlemen:

    Thank you. I checked both the Lee Valley and Freud catalogs and didn't see either of those. Duh!!

  5. #5
    Join Date
    Feb 2006
    Location
    close to Saskatoon, Saskatchewan
    Posts
    1,301

    Default

    Or use a 1/2" roundover bit with a fence on the router table.

    Cheers, Don

  6. #6
    Join Date
    Mar 2006
    Location
    Aylmer, QC
    Posts
    94

    Default

    Use a " quarter round router bit on each side and this will give you a bull nose. This is how I do-it and believe me, I do alot of bull nose moldings

Similar Threads

  1. Triton Router and LV Bit Jack
    By jjackson in forum Power Tools
    Replies: 1
    Last Post: 02-22-2008, 12:06 PM
  2. Router template guide to bit clearance
    By Charles in Lorette in forum Power Tools
    Replies: 5
    Last Post: 02-03-2008, 10:38 PM
  3. need router bit
    By Bill Simpson in forum Power Tools
    Replies: 1
    Last Post: 01-04-2008, 09:32 PM
  4. looking for new router
    By scroudt in forum Power Tools
    Replies: 28
    Last Post: 11-06-2007, 07:39 AM
  5. Lee Valley Dovetail Router bit mystery
    By Brian in Dawson Creek in forum Power Tools
    Replies: 10
    Last Post: 12-05-2006, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •