FREE SAMPLE ISSUE FREE NEWSLETTER DIGITAL ISSUE PREVIEW

Results 1 to 9 of 9

Thread: Rockwell Beaver 9 inch Table Saw Cat# 6201

  1. #1
    Join Date
    Feb 2012
    Location
    Grand Island
    Posts
    6
    Real Name
    Bob

    Default Rockwell Beaver 9 inch Table Saw Cat# 6201

    I purchased it about 40 years ago . . . still going strong! Anyone know if it's still possible to locate parts? I could use a side table extension (mod. no. 34-038) and a set of long guide bars (mod. no. 3238) . . . also my rip fence has seen better days (a lot of repairs) - mod. no. 1230005 . . . possibly an original or an "after market" replacement? . . . I retired recently, so a new saw is not very likely . . . If anyone has some ideas, I would really appreciate hearing from you.

  2. #2
    Join Date
    Oct 2010
    Location
    Unlisted, Ontario
    Posts
    5,837

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    Welcome to the forum....

    Your best bet is to hunt on kijiji.... They pop up every once in a while. Hopefully one will appear with the parts you're looking for.

    Good hunting...

  3. #3
    Join Date
    Feb 2012
    Location
    Grand Island
    Posts
    6
    Real Name
    Bob

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    Quote Originally Posted by J. Vibert View Post
    Welcome to the forum....

    Your best bet is to hunt on kijiji.... They pop up every once in a while. Hopefully one will appear with the parts you're looking for.

    Good hunting...
    Many thanks . . .

  4. #4
    Join Date
    Mar 2007
    Location
    sarnia ont
    Posts
    9,451
    Real Name
    Steve Morris

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    kijiji will be your best friend!!
    another saw with the parts you need is your best option

    or replace the fence with an aftermarket unit. get the long rails and make your own side extension from plywood

    redline, accusquare are two aftermarket fences that come to mind
    my shop is a beaver lodge
    steve, sarnia, ont

  5. #5
    Join Date
    Aug 2011
    Location
    Oshawa, ON
    Posts
    176

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    I think I have the rails and extension wings you're looking for - let me know if you are still looking. Only issue would be where 'Grand Island' is...Niagara?

  6. #6
    Join Date
    Mar 2012
    Location
    T0k0g0
    Posts
    1

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    Quote Originally Posted by RobertT View Post
    I purchased it about 40 years ago . . . still going strong! Anyone know if it's still possible to locate parts? I could use a side table extension (mod. no. 34-038) and a set of long guide bars (mod. no. 3238) . . . also my rip fence has seen better days (a lot of repairs) - mod. no. 1230005 . . . possibly an original or an "after market" replacement? . . . I retired recently, so a new saw is not very likely . . . If anyone has some ideas, I would really appreciate hearing from you.
    I have the parts you need. If you still need them let me know.

  7. #7
    Join Date
    Feb 2012
    Location
    Grand Island
    Posts
    6
    Real Name
    Bob

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    That sounds great! The only problem I see is that Grand Island is just south of the border, near
    NF, NY. That puts me about 210 km. from Oshawa, I think. I don't drive any more, so I would
    have to find someone willing to make the trip . . . not an impossible thing, but it may take a bit
    of time to arrange . . . All I need at this point is the long rails (a router will occupy the space of
    one extension wing) . . . how much do you want for them?
    I appreciate the response, bob

  8. #8
    Join Date
    Aug 2011
    Location
    Oshawa, ON
    Posts
    176

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    Hey Bob. I haven't been out to my garage to check - I'll do that tonight and post back.

    You might as well take both wings if someone is coming up, never know when you'd need a second - and I sure don't need it. I guess $20 for all of it? You'd probably have to pay whoever comes to get them. Haha, hadn't really thought about asking for money! Let me double-check everything and get back to you.

  9. #9
    Join Date
    Aug 2011
    Location
    Oshawa, ON
    Posts
    176

    Default Re: Rockwell Beaver 9 inch Table Saw Cat# 6201

    Bob, sent you a private message about the rails/wings - I do indeed have them and can hold on to them for as long as you need - no rush.

Similar Threads

  1. Restoring a Rockwell/Beaver #6201
    By TheYoungTurner in forum Vintage Power Tools
    Replies: 24
    Last Post: 03-18-2012, 10:13 PM
  2. Replies: 24
    Last Post: 11-20-2011, 04:59 PM
  3. Blades for a Rockwell/Beaver 6201?
    By jgroenewald in forum Vintage Power Tools
    Replies: 7
    Last Post: 10-18-2011, 11:01 AM
  4. Rockwell Beaver 6201 Table Saw Part Needed (Found)
    By RUSS ABBOTT in forum The Swap Meet
    Replies: 7
    Last Post: 03-17-2011, 07:32 AM
  5. Rockwell/Beaver 6201 needs bearing?
    By BrianF in forum Power Tools
    Replies: 3
    Last Post: 03-05-2011, 04:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •